Mini Indexing Plungers GN 822.10

Type: CN - Lock-out, with stainless steel knob

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Load Rating Information List of Indexing Plunger Types ISO Fundamental Tolerances Plastic Characteristics Stainless Steel Characteristics

Product description

Mini indexing plungers GN 822.10 are distinguished for their small dimensions.

Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads.

Pulling the plunger pin will release the hex nut which can then be tightened with an open-end spanner.

Type C / CN offers a lock-out position for applications that require the plunger pin to be retracted for an extended period of time. After retracting the plunger pin, turn the knob 30 degrees, release the knob and it will stay in the retracted position via the indexing lock.

Specification

Guide / Plunger pin
Stainless steel AISI 316L

Knob

Plastic, Polyamide (PA) for Type B / C
Black, matte finish
Stainless steel AISI 316 for Type BN / CN
Matte shot-blasted finish
Not removable

Spring
Stainless steel AISI 316Ti

RoHS

Accessory

Thin Hex Nuts ISO 8675 (with Fine Thread)

On request

With red knob

Your Contact

You are looking for a Winco partner near you?

Part Number B - Non lock-out, with plastic knob	Part Number BN - Non lock-out, with stainless steel knob	Part Number C - Lock-out, with plastic knob	Part Number CN - Lock-out, with stainless steel knob	d₁ Pin h9 Bore +0.001/+0.008	d₂	d₂	d₃	d₄	k	l₁	l₂ min.	l₃	A/F	Spring load ≈ Initial	End


822.10-4-M8-B	822.10-4-M8-BN	822.10-4-M8-C	822.10-4-M8-CN	0.157 h9 / +0.001/+0.008	M 8	-	0.83	0.59	0.65	1.08	0.20	0.24	0.39	0.90 lbf (4 N)	2.47 lbf (11 N)
822.10-4-M8X1-B	822.10-4-M8X1-BN	822.10-4-M8X1-C	822.10-4-M8X1-CN	0.157 h9 / +0.001/+0.008	-	M 8 x 1	0.83	0.59	0.65	1.08	0.20	0.24	0.39	0.90 lbf (4 N)	2.47 lbf (11 N)
822.10-5-M10-B	822.10-5-M10-BN	822.10-5-M10-C	822.10-5-M10-CN	0.197 h9 / +0.001/+0.008	M 10	-	0.98	0.71	0.79	1.34	0.24	0.31	0.47	1.35 lbf (6 N)	3.15 lbf (14 N)
822.10-5-M10X1-B	822.10-5-M10X1-BN	822.10-5-M10X1-C	822.10-5-M10X1-CN	0.197 h9 / +0.001/+0.008	-	M 10 x 1	0.98	0.71	0.79	1.34	0.24	0.31	0.47	1.35 lbf (6 N)	3.15 lbf (14 N)
822.10-6-M10-B	822.10-6-M10-BN	822.10-6-M10-C	822.10-6-M10-CN	0.236 h9 / +0.001/+0.008	M 10	-	0.98	0.71	0.79	1.34	0.24	0.31	0.47	1.35 lbf (6 N)	3.15 lbf (14 N)
822.10-6-M10X1-B	822.10-6-M10X1-BN	822.10-6-M10X1-C	822.10-6-M10X1-CN	0.236 h9 / +0.001/+0.008	-	M 10 x 1	0.98	0.71	0.79	1.34	0.24	0.31	0.47	1.35 lbf (6 N)	3.15 lbf (14 N)
822.10-8-M16-B	822.10-8-M16-BN	822.10-8-M16-C	822.10-8-M16-CN	0.315 h9 / +0.001/+0.008	M 16	-	1.30	0.91	1.00	1.87	0.39	0.47	0.67	2.25 lbf (10 N)	7.19 lbf (32 N)
822.10-8-M16X1.5-B	822.10-8-M16X1.5-BN	822.10-8-M16X1.5-C	822.10-8-M16X1.5-CN	0.315 h9 / +0.001/+0.008	-	M 16 x 1.5	1.30	0.91	1.00	1.87	0.39	0.47	0.67	2.25 lbf (10 N)	7.19 lbf (32 N)
822.10-10-M16-B	822.10-10-M16-BN	822.10-10-M16-C	822.10-10-M16-CN	0.394 h9 / +0.001/+0.008	M 16	-	1.30	0.91	1.00	1.87	0.39	0.47	0.67	2.25 lbf (10 N)	7.19 lbf (32 N)
822.10-10-M16X1.5-B	822.10-10-M16X1.5-BN	822.10-10-M16X1.5-C	822.10-10-M16X1.5-CN	0.394 h9 / +0.001/+0.008	-	M 16 x 1.5	1.30	0.91	1.00	1.87	0.39	0.47	0.67	2.25 lbf (10 N)	7.19 lbf (32 N)

d₁ Pin h9 Bore +0.001/+0.008	d₂	d₂	d₃	d₄	k	l₁	l₂ min.	l₃	A/F	Spring load ≈ Initial	End

0.157	M 8	M 8 x 1	0.83	0.59	0.65	1.08	0.20	0.24	0.39	0.90 lbf (4 N)	2.47 lbf (11 N)
0.197	M 10	M 10 x 1	0.98	0.71	0.79	1.34	0.24	0.31	0.47	1.35 lbf (6 N)	3.15 lbf (14 N)
0.236	M 10	M 10 x 1	0.98	0.71	0.79	1.34	0.24	0.31	0.47	1.35 lbf (6 N)	3.15 lbf (14 N)
0.315	M 16	M 16 x 1.5	1.30	0.91	1.00	1.87	0.39	0.47	0.67	2.25 lbf (10 N)	7.19 lbf (32 N)
0.394	M 16	M 16 x 1.5	1.30	0.91	1.00	1.87	0.39	0.47	0.67	2.25 lbf (10 N)	7.19 lbf (32 N)