GN 293 Actionneurs linéaires Acier, inox, unités linéaires tubulaires, avec deux arbres filetés séparés

The load data apply to GN 291, GN 292, GN 293 linear actuators made of steel (SCR) or stainless steel (NI).
The specified forces Fy and Fz cause a flexure of the guide tube of approx. 0.5 mm.

A lead nut moves in axial direction over the ball bearing trapezoidal thread spindle of the linear actuators. The drive key ensures the anti-rotation and provides the connection to the different linear actuator connectors. The linear actuators are designed for manual operation (handwheel).

The positioning accuracy is 0.2 mm / 300 mm stroke, the backlash is max. 0.1 mm.

Guide tubes are available in chrome plated steel (SCR) or stainless steel (NI). They are manufactured with the tolerance range of DIN 2391 or DIN 2462 precision
steel tubes.

A wide variety of different components are available in the connector clamp range to mount the linear actuators in place and to upgrade them to linear actuator
connectors.

Also, digital position indicators (Indicateurs de position numériques EN 953 / Indicateurs de position numériques EN 954 / Indicateurs de position numériques EN 9053 / Indicateurs de position numériques en plastique EN 9054 may be attached to measure the movement or the
position.

For applications where high torsionional moments Mx occur, linear actuators with square tube or double tube linear actuators should be given preference.

Also for square tubes there is a wide variety of different components available from the connector clamp range. The linear actuator connectors are composed of
two-part elements, with the effect that the precision of the square tubes involves no special requirements.

for Standard Stroke Lengths l1 of Linear Actuators GN 291

Spécification

Échelle gravée avec une précision laser

Information
The longitudinal scales GN 299 of type A and B are normally used in connection with the linear actuators Actionneurs linéaires GN 291 and Actionneurs linéaires carrés GN 291.1, the scales of type C and D are normally used for the linear actuators Actionneurs linéaires GN 292 and Actionneurs linéaires GN 293.

Longitudinal scales can only be ordered togehter with linear actuators.