GN 5861 Load Rings Steel, Weldable

Load Rings GN 5861: Steel, Weldable

Product description

Load rings GN 5861 rotate by means of a ball bearing and are used with separate lifting gear and lashing equipment. They are welded to load-bearing equipment or directly onto the load itself and absorb loads in any direction. The large ring facilitates attachment.

The nominal load capacity is indicated on the ring. Load rings GN 5861 comply with the Machinery Directive 2006/42/EC and DGUV rules GS-HM-36.

Specification

Load ring
Steel German Material No. 1.6541

  • Forged
  • High-tensile tempered
  • 100 % electro magnetic tensile tested to
    EN 1677-1
  • Powder coated, pink

Bearing case
Steel German Material No. 1.6541

  • Forged
  • High-tensile tempered
  • 100 % electro magnetic tensile tested to
    EN 1677-1
  • Galvanically zinc plated

Weld-on flange
Steel German Material No. 1.6541

  • High-tensile tempered
  • 100 % electro magnetic tensile tested to
    EN 1677-1

RoHS

Hide technical drawing
GN 5861 Steel Load Rings, Weldable sketch

Part Options / Table

Type

RWith oval ring
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
dh1h2h3h4k1k2k3k4Nominal load capacity
in t (WLL)
1.574.494.132.201.930.352.091.383.110.63
1.814.964.532.092.440.432.241.383.191.5
2.405.835.312.263.090.512.601.733.662.5
3.077.406.772.913.860.633.031.974.634
3.749.538.784.074.700.753.862.366.225
3.9410.479.534.215.310.944.452.566.678

Build & Price

Diameter d
Type

Diameter d
Type

Load Capacity

00e21e16-84ad-4f3c-be63-816ddc371766
Show / Hide columns
Diameter dNominal load capacity
in t (WLL)
F1
max. in t
F2
max. in t
400.630.630.63
461.51.51.5
612.52.52.5
78444
9556.75
1008108

The specified load values apply to an operating temperature range of -40 °F to+392 °F (-40 °C to +200 °C). Further information can be found in the operating instructions.

Wear / Service Life / Safety Instructions

5ae31505-8fa1-44c9-b99b-2848f7a0f7e1

  1. If the wear exceeds 10% of the cross-section, the lifting point is worn out and has reached the end of its service life.

  2. If the load ring is bent or shows signs of damage or cracks, it is no longer safe to use. In either case, replacement is required.

The information in the operating instructions must be complied with during installation, commissioning and use. These are included with the product and are available digitally at jwwinco.com.

Fastening / Welding Instructions

51d22e6b-9f01-4316-bdcf-331074a626a8
Show / Hide columns
Diameter dSize of weld seam
40
        a4
46
        a5
61HY 3 + a5
78HY 3 + a6
95HY 3 + a8
100HY 3 + a10

The welding must be carried out by a certified welder in accordance with ISO 9606-1.

Selected Part

Total (net)
Can$354.46
Available within 1-2 weeks
Save as Favorites
Recommend a product
Please note our quantity discounts (Canadian Dollars).
MinMaxPrice
14Can$354.46
59Can$324.92
1024Can$295.38
≥ 25Can$265.84
Prop 65: Not compliant
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RoHS: Compliant
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.771 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

CAD Download

CAD Download Tutorial

Need Help?

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Eastern Time: 800-397-6993

Special Requests | Contact our sales team

GN 5861-40-RGN 5861-46-RGN 5861-61-RGN 5861-78-RGN 5861-95-RGN 5861-100-R

Your Contact

You are looking for a Winco partner near you?

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Central Time

Request Callback