Hinge Leafs GN 2291

Type: AF - Exterior hinge leaf
Identification: A - Without bores

Accessories for Profile Systems

Standard elements in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Winco standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

compatible with the common profile systems
for groove widths of 6, 8 and 10 mm
for profiles 30, 40 and 45 mm

Show All Compatible Products

Operating Instruction for GN 2290

Product description

Hinge leafs GN 2291 can be combined with hinge pin sets GN 2290 into individualized hinge versions.

Special lengths can be created for a hinge leaf length of l₂ ≥ 250 mm, since the increased mounting hole distance from the end allows shortening the hinge leaf.

Specification

Aluminum
Anodized finish, natural colorEL

RoHS

Accessory

GN 2290 Hinge Pin Sets
GN 50b T-Nuts
GN 50i T-Nuts
GN 51b T-Slot Nuts

On request

Other lengths and hole spacings
Other finishes

Your Contact

You are looking for a Winco partner near you?

Part Number A - Without bores	Part Number C - With countersunk holes	l₁ Type AF Type AN	Type IF Type IN	l₂	d₁	d₂	d₃	k	l₃	l₄	m₁ Type AF Type AN	Type IF Type IN	m₂	m₃	m₄	n -0.012	s₁	s₂

2291-43-40-AF-A-EL		1.69	-	1.57	-	0.55	0.31	1.57	1.42	-	0.80	-	-	-	5.91	0.315 -0.012	0.14	-
	2291-43-40-AF-C-EL	1.69	-	1.57	0.26	0.55	0.31	1.57	1.42	-	0.80	-	-	-	5.91	0.315 -0.012	0.14	-
2291-43-80-AF-A-EL		1.69	-	3.15	-	0.55	0.31	1.57	1.42	-	0.80	-	1.97	-	5.91	0.315 -0.012	0.14	-
	2291-43-80-AF-C-EL	1.69	-	3.15	0.26	0.55	0.31	1.57	1.42	-	0.80	-	1.97	-	5.91	0.315 -0.012	0.14	-
2291-43-250-AF-A-EL		1.69	-	9.84*	-	0.55	0.31	1.57	1.42	-	0.80	-	-	1.97	5.91	0.315 -0.012	0.14	-
	2291-43-250-AF-C-EL	1.69	-	9.84*	0.26	0.55	0.31	1.57	1.42	-	0.80	-	-	1.97	5.91	0.315 -0.012	0.14	-
2291-43-400-AF-A-EL		1.69	-	15.75*	-	0.55	0.31	1.57	1.42	-	0.80	-	-	1.97	5.91	0.315 -0.012	0.14	-
	2291-43-400-AF-C-EL	1.69	-	15.75*	0.26	0.55	0.31	1.57	1.42	-	0.80	-	-	1.97	5.91	0.315 -0.012	0.14	-

Part Number A - Without bores	Part Number C - With countersunk holes	l₁ Type AF Type AN	Type IF Type IN	l₂	d₁	d₂	d₃	k	l₃	l₄	m₁ Type AF Type AN	Type IF Type IN	m₂	m₃	m₄	n -0.012	s₁	s₂

2291-43-40-AN-A-EL		1.69	-	1.57	-	0.55	0.31	1.57	1.42	-	0.80	-	-	-	5.91	0.315 -0.012	0.14	0.26
	2291-43-40-AN-C-EL	1.69	-	1.57	0.26	0.55	0.31	1.57	1.42	-	0.80	-	-	-	5.91	0.315 -0.012	0.14	0.26
2291-43-80-AN-A-EL		1.69	-	3.15	-	0.55	0.31	1.57	1.42	-	0.80	-	1.97	-	5.91	0.315 -0.012	0.14	0.26
	2291-43-80-AN-C-EL	1.69	-	3.15	0.26	0.55	0.31	1.57	1.42	-	0.80	-	1.97	-	5.91	0.315 -0.012	0.14	0.26

Part Number A - Without bores	Part Number C - With countersunk holes	l₁ Type AF Type AN	Type IF Type IN	l₂	d₁	d₂	d₃	k	l₃	l₄	m₁ Type AF Type AN	Type IF Type IN	m₂	m₃	m₄	n -0.012	s₁	s₂

2291-50-40-IF-A-EL		-	1.97	1.57	-	0.55	0.31	1.57	-	1.69	-	1.08	-	-	5.91	0.315 -0.012	0.14	-
	2291-50-40-IF-C-EL	-	1.97	1.57	0.26	0.55	0.31	1.57	-	1.69	-	1.08	-	-	5.91	0.315 -0.012	0.14	-
2291-50-80-IF-A-EL		-	1.97	3.15	-	0.55	0.31	1.57	-	1.69	-	1.08	1.97	-	5.91	0.315 -0.012	0.14	-
	2291-50-80-IF-C-EL	-	1.97	3.15	0.26	0.55	0.31	1.57	-	1.69	-	1.08	1.97	-	5.91	0.315 -0.012	0.14	-
2291-50-250-IF-A-EL		-	1.97	9.84*	-	0.55	0.31	1.57	-	1.69	-	1.08	-	1.97	5.91	0.315 -0.012	0.14	-
	2291-50-250-IF-C-EL	-	1.97	9.84*	0.26	0.55	0.31	1.57	-	1.69	-	1.08	-	1.97	5.91	0.315 -0.012	0.14	-
2291-50-400-IF-A-EL		-	1.97	15.75*	-	0.55	0.31	1.57	-	1.69	-	1.08	-	1.97	5.91	0.315 -0.012	0.14	-
	2291-50-400-IF-C-EL	-	1.97	15.75*	0.26	0.55	0.31	1.57	-	1.69	-	1.08	-	1.97	5.91	0.315 -0.012	0.14	-

Part Number A - Without bores	Part Number C - With countersunk holes	l₁ Type AF Type AN	Type IF Type IN	l₂	d₁	d₂	d₃	k	l₃	l₄	m₁ Type AF Type AN	Type IF Type IN	m₂	m₃	m₄	n -0.012	s₁	s₂

2291-50-40-IN-A-EL		-	1.97	1.57	-	0.55	0.31	1.57	-	1.69	-	1.08	-	-	5.91	0.315 -0.012	0.14	0.26
	2291-50-40-IN-C-EL	-	1.97	1.57	0.26	0.55	0.31	1.57	-	1.69	-	1.08	-	-	5.91	0.315 -0.012	0.14	0.26
2291-50-80-IN-A-EL		-	1.97	3.15	-	0.55	0.31	1.57	-	1.69	-	1.08	1.97	-	5.91	0.315 -0.012	0.14	0.26
	2291-50-80-IN-C-EL	-	1.97	3.15	0.26	0.55	0.31	1.57	-	1.69	-	1.08	1.97	-	5.91	0.315 -0.012	0.14	0.26

l₁ Type AF Type AN	Type IF Type IN	l₂	d₁	d₂	d₃	k	l₃	l₄	m₁ Type AF Type AN	Type IF Type IN	m₂	m₃	m₄	n -0.012	s₁	s₂

1.69	1.97	1.57	3.15	9.84*	15.75*	0.26	0.55	0.31	1.57	1.42	1.69	0.80	1.08	1.97	1.97	5.91	0.315	0.14	0.26

Min	Max	Price
1	99	Can$11.59
100	249	Can$10.63
250	499	Can$9.66
≥ 500		Can$8.69

Please select the country.

Select State

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Central Time

1-800-397-6993 sales@jwwinco.ca

Request Callback

JW Winco Services

Request Callback

JW Winco Handbook

Your Contact

GN 2291 Hinge Leafs Aluminum, for Aluminum Profiles / Panel Elements

Accessories for Profile Systems

Product description

Specification

Accessory

On request

Part Options / Table

Type

Identification

Type: AF - Exterior hinge leaf

Type: AN - Exterior hinge leaf, with positioning guide

Type: IF - Interior hinge leaf

Type: IN - Interior hinge leaf, with positioning guide

Metric

Build & Price

Mounting Information

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

GN 2292

GN 2294

GN 2295

GN 2295

GN 2290

Your Contact

JW Winco Services

AF	Exterior hinge leaf
AN	Exterior hinge leaf, with positioning guide
IF	Interior hinge leaf
IN	Interior hinge leaf, with positioning guide


							Left / right hinges Right or left hinges can be created by the direction in which the bearing bushings are inserted into the hinge leaf.
							Mounting on door frames For mounting a door that should be removable, two hinges of the same type must be attached to the door frame. If the door is not supposed to be removable, the door must be mounted with at least one right hinge and one left hinge.
							Assembly Position the bearing bushing with the desired installation direction on the hinge leaf. Then insert a screw with a collar such as an ISO 7380 oval head screw into the bearing bushing to protect the bearing bushing collar from damage while hammering in. Hammer in the bearing bushing until about 1 mm remains between the bearing bushing collar and the hinge wing. Remove the burr on the bearing bushing using a knife. Hammer in the bearing bushing all the way. Remove the screw. Hammer a tapered dowel pin into the bearing bushing. Place the cover cap on the opposite side of the hinge wing. Insert the other bearing bushings according to points 1 to 5.