The cart is empty.

Empty cart Open cart

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Central Time

1-800-397-6993 sales@jwwinco.ca

Request Callback

Full name Phone number Company Country Yes, I have noted the Privacy Policy.

JW Winco Handbook
JW Winco’s handbook will support designers and engineers with the largest selection of standard parts.

Request Free Catalogs
Your Contact

You are looking for a Winco partner near you?

Please select the country. Select State

Send a message

JW Winco News
All the information you need about news from JW Winco!

All News

GN 744 Fluid Sight Glasses Aluminum, Sight Glass Plastic

Fluid Sight Glasses GN 744: Aluminum, Sight Glass Plastic

Type: A - With prismatic effect (only d₁ = 14 / 18 / 24 mm)

Product description

Fluid sight glasses GN 744 in type A use the prismatic effect of a cat’s eye to give a clear indication of the fluid level unaffected by fluid color or fluid viscosity. The advantage of this effect is particularly obvious in the case of underfilling or overfilling and for inspection under unfavorable light conditions.

The seal is embedded in a radial recess, and thus cannot be lost or squeezed out during tightening.

These fluid sight glasses can also be used on pressurized tanks. Tests regarding maximum pressure are available.

Specification

Body
Aluminum, fine turned

Sight glass
Plastic
Crystal clear Polyamide PA-T
Temperature resistant up to 230 °F (110 °C)

Marking ring
Pad printing, red

Seals
Rubber NBR (Perbunan^®)

RoHS

Accessory

Thin Hex Nuts GN 7430
Weld Bushings GN 7490

On request

EPDM seals

GN 744 Aluminum Fluid Sight Glasses, Sight Glass Plastic sketch

Hide technical drawing

Part Options / Table

Type

A	With prismatic effect (only d₁ = 14 / 18 / 24 mm)
B	Without reflector (all sizes)
C	With red marking ring (only d₁ = 11 / 14 / 18 / 24 mm)

Type: B - Without reflector (all sizes)

Show / Hide columns

Dimensions in: Inch (change to Metric)

Part Number	d₁	d₂ Pipe thread	Fine thread	d₃	l₁	l₂	s

744-7-G1/4-B	0.28	G 1/4	-	0.79	0.30	0.26	0.71
744-7-M12X1.5-B	0.28	-	M 12 x 1.5	0.79	0.30	0.26	0.71
744-11-G3/8-B	0.43	G 3/8	-	0.87	0.31	0.30	0.79
744-11-M16X1.5-B	0.43	-	M 16 x 1.5	0.87	0.31	0.30	0.79
744-14-G1/2-B	0.55	G 1/2	-	1.02	0.33	0.30	0.91
744-14-M20X1.5-B	0.55	-	M 20 x 1.5	1.02	0.33	0.30	0.91
744-18-G3/4-B	0.71	G 3/4	-	1.26	0.35	0.31	1.18
744-18-M26X1.5-B	0.71	-	M 26 x 1.5	1.26	0.35	0.31	1.18
744-18-M27X1.5-B	0.71	-	M 27 x 1.5	1.26	0.35	0.31	1.18
744-24-G1-B	0.94	G 1	-	1.57	0.43	0.33	1.42
744-24-M33X1.5-B	0.94	-	M 33 x 1.5	1.57	0.43	0.33	1.42

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁	d₂ Pipe thread	Fine thread		d₃	l₁	l₂	s

0.28	G 1/4	M 12 x 1.5	-	0.79	0.30	0.26	0.71
0.43	G 3/8	M 16 x 1.5	-	0.87	0.31	0.30	0.79
0.55	G 1/2	M 20 x 1.5	-	1.02	0.33	0.30	0.91
0.71	G 3/4	M 26 x 1.5	M 27 x 1.5	1.26	0.35	0.31	1.18
0.94	G 1	M 33 x 1.5	-	1.57	0.43	0.33	1.42

Build & Price

Assembly note

For wall thicknesses below 0.16 in (4 mm), use GN 7430 thin hex nuts.

Selected Part

Part Number

Total (net)

Can$12.95

In Stock: 2

In Stock

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	49	Can$12.95
50	99	Can$11.87
100	249	Can$10.79
≥ 250		Can$9.71

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.026 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

CAD Download

Other Data Formats

About CAD Downloads

Need Help?

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Eastern Time: 800-397-6993

Special Requests | Contact our sales team

Your Contact

You are looking for a Winco partner near you?

Please select the country. Select State

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Central Time

1-800-397-6993 sales@jwwinco.ca

Request Callback

JW Winco Services

Request Callback

JW Winco Handbook

Your Contact

GN 744 Fluid Sight Glasses Aluminum, Sight Glass Plastic