Original design code: HGFT-PR
Product description
The sight glass of fluid sight glasses EN 543.3 is molded in the body during the injection process and it is therefore absolutely leak tight.
These fluid sight glasses use the prismatic effect of a cat’s eye to give a clear indication of the fluid level unaffected by fluid color or fluid viscosity. The advantage of this effect is particularly obvious in the case of underfilling or overfilling and for inspection under unfavorable light conditions.
The seal is embedded in a radial recess, and thus cannot be squeezed out during tightening.
Assembly note:
For wall thicknesses below 0.16 in (4 mm), use thin hex nuts GN 7430.
Specification
- Body
Plastic
Technopolymer (Polyamide PA)- Black, matte finish
- Temperature resistant up to 212 °F (100 °C)
- Pressure resistant up to 3 bar
- Sight glass
Plastic
Crystal clear Polyamide PA-T
- Seal
Rubber NBR (Perbunan®)
RoHS
