Product description
Breather filters GN 884 are used when an air exchange is to be enabled between a closed interior and the outside. This effectively prevents underpressure or overpressure occurring in the system.
The stainless steel wire mesh prevents airborne particles above a certain size from entering the interior from the outside and, at the same time, ensures that fluid particles do not escape to the outside.
A symbol “BE” (type A) or a blue colored ring (type B) mark the filter function. The recommended installation position is vertically upwards.
Assembly note:
For wall thicknesses below 4 mm, use thin hex nuts GN 7430.
Specification
Body
BrassMS
Air filter
- Stainless steel wire mesh AISI 304
- Filter class G2-G3
- Mean separation efficiency
(Am approx. 65-85 %,
based on a particle size > 10 μm)
Seal DIN 7603 A
Soft iron 1.0338
(at d1 = M10x1: PA6)
Breather cap (Type B)
Stainless steel AISI 304
Temperature resistant from
-22 °F to +392 °F (-30 °C to +200 °C)
RoHS
On request
Other materials
Other dimensions