Indexing Plungers GN 724.6

Type: C1 - Chamfer, top
Material / Finish: ZB - Zinc plated, blue passivated finish
Identification no.: 1 - Without catch

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Accessories for Profile Systems

Standard elements in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Winco standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

compatible with the common profile systems
for groove widths of 6, 8 and 10 mm
for profiles 30, 40 and 45 mm

Show All Compatible Products

Application Examples List of Indexing Plunger Types ISO Fundamental Tolerances Stainless Steel Characteristics

Product description

Indexing plungers GN 724.6 have a plunger pin with square cross-section, a latching surface on one side and a chamfer on the other. When the object to be secured moves towards the chamfer, the plunger pin is pushed back into the guide, allowing grooves and edges to pass over the pin. The plunger pin engages automatically in the direction of the latching surface.

The latching can be released by pulling the pull ring by hand or with a cable or pull rod using a hook. The types with lock-out are used when the plunger pin should temporarily not protrude. For this purpose, the pull ring is turned sideways after the plunger pin has been retracted. The ring is held in this position by the catch recess at the top of the guide.

The dimensional tolerances between the pin and the guide have been chosen to ensure functional reliability even in roughly dimensioned applications or in the event of soiling.

For fastening, slotted or hex mounting holes allow the use of socket cap screws DIN 912 and hex head screws or nuts according to DIN 931 or DIN 934.

Specification

Guide / Catch

Steel precision casting
- Zinc plated, blue passivated finishZB
- Zinc plated and powder coated
  Black, RAL 9005, textured finishSW
Stainless steel precision castingNI AISI CF-8

Pull ring

Steel precision casting
Zinc plated, blue passivated finish (for ZB and SW)
Stainless steel precision casting AISI CF-8 (for NI)

Plunger pin

Steel, hardened
Zinc plated, blue passivated finish (for ZB and SW)
Stainless steel AISI 431, hardened (for NI)

Compression spring
Stainless steel AISI 316Ti

RoHS

GN 724.6 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, with Mounting Flange sketch

Hide technical drawing

Part Options / Table

Type

C1	Chamfer, top
C2	Chamfer, bottom
C3	Chamfer, right
C4	Chamfer, left

Identification no.

1	Without catch
2	With catch

Part Number 1 - Without catch	Part Number 2 - With catch	b₁ Pin h11 Guide +0.004/+0.02	s	a	d₁	d₂	h₁	k₁ min.	l₁ ≈	l₂	l₃	l₄	l₅	l₆	l₇	Spring load ≈ Initial	End

724.6-13-20-C1-ZB-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C1-SW-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C1-NI-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C1-ZB-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C1-SW-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C1-NI-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-20-30-C1-ZB-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C1-SW-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C1-NI-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C1-ZB-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C1-SW-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C1-NI-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)

Part Number 1 - Without catch	Part Number 2 - With catch	b₁ Pin h11 Guide +0.004/+0.02	s	a	d₁	d₂	h₁	k₁ min.	l₁ ≈	l₂	l₃	l₄	l₅	l₆	l₇	Spring load ≈ Initial	End

724.6-13-20-C2-ZB-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C2-SW-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C2-NI-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C2-ZB-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C2-SW-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C2-NI-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-20-30-C2-ZB-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C2-SW-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C2-NI-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C2-ZB-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C2-SW-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C2-NI-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)

Part Number 1 - Without catch	Part Number 2 - With catch	b₁ Pin h11 Guide +0.004/+0.02	s	a	d₁	d₂	h₁	k₁ min.	l₁ ≈	l₂	l₃	l₄	l₅	l₆	l₇	Spring load ≈ Initial	End

724.6-13-20-C3-ZB-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C3-SW-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C3-NI-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C3-ZB-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C3-SW-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C3-NI-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-20-30-C3-ZB-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C3-SW-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C3-NI-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C3-ZB-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C3-SW-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C3-NI-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)

Part Number 1 - Without catch	Part Number 2 - With catch	b₁ Pin h11 Guide +0.004/+0.02	s	a	d₁	d₂	h₁	k₁ min.	l₁ ≈	l₂	l₃	l₄	l₅	l₆	l₇	Spring load ≈ Initial	End

724.6-13-20-C4-ZB-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C4-SW-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-13-20-C4-NI-1		0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	-	2.68	0.39	1.38	0.04	1.63	1.89	-	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C4-ZB-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C4-SW-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
	724.6-13-20-C4-NI-2	0.512 h11 / +0.004/+0.02	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
724.6-20-30-C4-ZB-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C4-SW-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
724.6-20-30-C4-NI-1		0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	-	4.02	0.59	2.13	0.06	2.36	3.15	-	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C4-ZB-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C4-SW-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)
	724.6-20-30-C4-NI-2	0.787 h11 / +0.004/+0.02	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

b₁ Pin h11 Guide +0.004/+0.02	s	a	d₁	d₂	h₁	k₁ min.	l₁ ≈	l₂	l₃	l₄	l₅	l₆	l₇	Spring load ≈ Initial	End

0.512	0.79	0.26	1.34	0.24	0.39	0.06	2.68	0.39	1.38	0.04	1.63	1.89	1.04	3.15 lbf (14 N)	7.87 lbf (35 N)
0.787	1.18	0.39	1.89	0.35	0.59	0.08	4.02	0.59	2.13	0.06	2.36	3.15	1.57	4.95 lbf (22 N)	15.74 lbf (70 N)

Show / Hide columns

Dimensions in: Inch (change to Metric)

b₁ Pin h11 Guide +0.004/+0.02	s	b₂ +0.012	d₃ +0.008	h₂	h₃	k₂	k₃	k₄	k₅	k₆	k₇	m	A/F

0.512	0.79	0.256	0.240	0.30	0.06	0.30	0.71	0.47	0.75	0.10	0.06	1.34	0.39
0.787	1.18	0.394	0.398	0.55	0.20	0.55	1.34	0.39	1.08	0.12	0.08	2.17	0.67

Build & Price

Application Examples

Application Examples

Selected Part

Part Number

Total (net)

Can$43.20

Delivery time 5-7 days: 110
Contact for delivery time >110

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	24	Can$43.20
25	49	Can$39.60
50	99	Can$36.00
≥ 100		Can$32.40

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.410 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

CAD Download

Other Data Formats

About CAD Downloads

Need Help?

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Eastern Time: 800-397-6993

Special Requests | Contact our sales team

JW Winco Services

Request Callback

JW Winco Handbook

Your Contact

GN 724.6 Indexing Plungers Steel / Stainless Steel, with Chamfered Pin, with Mounting Flange

Product Family Stainless Steel

Accessories for Profile Systems

Product description

Specification

Part Options / Table

Type

Identification no.

Type: C1 - Chamfer, top

Type: C2 - Chamfer, bottom

Type: C3 - Chamfer, right

Type: C4 - Chamfer, left

Type: C1 - Chamfer, top

Type: C2 - Chamfer, bottom

Type: C3 - Chamfer, right

Type: C4 - Chamfer, left

Metric

Build & Price

Application Examples

Application Examples

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

Recently Viewed

GN 724.6

Your Contact

JW Winco Services

b₁ Pin h11 Guide +0.004/+0.02	s	b₂ +0.012	d₃ +0.008	h₂	h₃	k₂	k₃	k₄	k₅	k₆	k₇	m	A/F

0.512 h11 / +0.004/+0.02	0.79	0.256 +0.012	0.240 +0.008	0.30	0.06	0.30	0.71	0.47	-	-	-	1.34	0.39
0.512 h11 / +0.004/+0.02	0.79	0.256 +0.012	0.240 +0.008	0.30	0.06	0.30	0.71	0.47	-	-	-	1.34	0.39
0.512 h11 / +0.004/+0.02	0.79	0.256 +0.012	0.240 +0.008	0.30	0.06	0.30	0.71	0.47	-	-	-	1.34	0.39
0.512 h11 / +0.004/+0.02	0.79	0.256 +0.012	0.240 +0.008	0.30	0.06	0.30	0.71	0.47	0.75	0.10	0.06	1.34	0.39
0.512 h11 / +0.004/+0.02	0.79	0.256 +0.012	0.240 +0.008	0.30	0.06	0.30	0.71	0.47	0.75	0.10	0.06	1.34	0.39
0.512 h11 / +0.004/+0.02	0.79	0.256 +0.012	0.240 +0.008	0.30	0.06	0.30	0.71	0.47	0.75	0.10	0.06	1.34	0.39
0.787 h11 / +0.004/+0.02	1.18	0.394 +0.012	0.398 +0.008	0.55	0.20	0.55	1.34	0.39	-	-	-	2.17	0.67
0.787 h11 / +0.004/+0.02	1.18	0.394 +0.012	0.398 +0.008	0.55	0.20	0.55	1.34	0.39	-	-	-	2.17	0.67
0.787 h11 / +0.004/+0.02	1.18	0.394 +0.012	0.398 +0.008	0.55	0.20	0.55	1.34	0.39	-	-	-	2.17	0.67
0.787 h11 / +0.004/+0.02	1.18	0.394 +0.012	0.398 +0.008	0.55	0.20	0.55	1.34	0.39	1.08	0.12	0.08	2.17	0.67
0.787 h11 / +0.004/+0.02	1.18	0.394 +0.012	0.398 +0.008	0.55	0.20	0.55	1.34	0.39	1.08	0.12	0.08	2.17	0.67
0.787 h11 / +0.004/+0.02	1.18	0.394 +0.012	0.398 +0.008	0.55	0.20	0.55	1.34	0.39	1.08	0.12	0.08	2.17	0.67