Crocodile Clamps NO. 6312 VI

Product description

Crocodile clamps NO. 6312 VI are infinitely adjustable, easily expanded for every clamping height. They are used for a variety of clamping applications including those using T-grooves and threaded holes.

Use allen wrench (not included) to mount or remove the stud bolt, allowing for better handling when setting up the clamp. The allen wrench should not be used for clamping.

Compression piece and adjustable holders are connected permanently to the clamp body, so the crocodile clamp can be used quickly.

The clamp body is equipped with two varied clamping surfaces and can be easily turned to use one side or the other. Due to the fully assembled construction, this makes for easy set-up and handling on equipment. Crocodile clamps are especially suitable for use on injection molding machines and various presses.

Specification

Clamp body / Compression pieces / Adjustable holders
Steel

Tempered
Galvanized finish

Stud bolt DIN 6379
Steel

Tempered
Blackened finish

Washer DIN 6340
Steel

Tempered
Blackened finish

Nut DIN 6330B
Steel

Tempered
Blackened finish

RoHS

Accessory

T-Slot Bolts DIN 787
T-Slot Nuts DIN 508

Selected Part

Part Number	d	Thread	Length	b₁ x l₁	b₂	h₁	h₂	h₃	h₄ min. ... max. (millimeter)	h₅	l₂	l₃	l₄	A/F in mm	Max. clamping force F

A375956	B 13	M 12	3.94	44 x 115	1.18	1.06	0.67	0.47	0...30	0.71	0.43	0.98	1.18	4	6744 lbf (30 kN)
A375972	B 13	M 12	4.92	44 x 115	1.18	1.06	0.67	0.47	0...55	0.71	0.43	0.98	1.18	4	6744 lbf (30 kN)
A375998	B 17	M 12	4.92	55 x 150	1.61	1.42	0.83	0.67	0...50	0.79	0.47	1.38	1.42	4	8992 lbf (40 kN)
A376004	B 17	M 12	6.30	55 x 150	1.61	1.42	0.83	0.67	0...70	0.79	0.47	1.38	1.42	4	8992 lbf (40 kN)
A376012	B 17	M 16	4.92	55 x 150	1.61	1.42	0.83	0.67	0...40	0.79	0.47	1.38	1.42	4	8992 lbf (40 kN)
A376020	B 17	M 16	6.30	55 x 150	1.61	1.42	0.83	0.67	0...70	0.79	0.47	1.38	1.42	4	8992 lbf (40 kN)
A376038	B 21	M 16	6.30	62 x 187	1.18	1.65	1.06	0.79	0...40	1.18	0.55	1.73	1.73	4	13489 lbf (60 kN)
A376046	B 21	M 16	7.87	62 x 187	1.18	1.65	1.06	0.79	0...80	1.18	0.55	1.73	1.73	4	13489 lbf (60 kN)
A376053	B 21	M 20	6.30	62 x 187	1.18	1.65	1.06	0.79	0...40	1.18	0.55	1.73	1.73	5	13489 lbf (60 kN)
A376061	B 21	M 20	7.87	62 x 187	1.18	1.65	1.06	0.79	0...80	1.18	0.55	1.73	1.73	5	13489 lbf (60 kN)
A376079	B 25	M 20	7.87	70 x 235	1.18	2.01	1.34	0.94	0...70	1.22	0.67	2.36	1.85	5	16861 lbf (75 kN)
A376087	B 25	M 20	9.84	70 x 235	1.18	2.01	1.34	0.94	0...100	1.22	0.67	2.36	1.85	5	16861 lbf (75 kN)
A376103	B 25	M 24	7.87	70 x 235	1.18	2.01	1.34	0.94	0...70	1.22	0.67	2.36	1.85	5	16861 lbf (75 kN)
A376095	B 25	M 24	9.84	70 x 235	1.18	2.01	1.34	0.94	0...100	1.22	0.67	2.36	1.85	5	16861 lbf (75 kN)

d	Thread	Length	b₁ x l₁	b₂	h₁	h₂	h₃	h₄ min. ... max. (millimeter)	h₅	l₂	l₃	l₄	A/F in mm	Max. clamping force F

B 13	M 12	3.94	44 x 115	1.18	1.06	0.67	0.47	0...30	0.71	0.43	0.98	1.18	4	6744 lbf (30 kN)
B 13	M 12	4.92	44 x 115	1.18	1.06	0.67	0.47	0...55	0.71	0.43	0.98	1.18	4	6744 lbf (30 kN)
B 17	M 12	4.92	55 x 150	1.61	1.42	0.83	0.67	0...50	0.79	0.47	1.38	1.42	4	8992 lbf (40 kN)
B 17	M 12	6.30	55 x 150	1.61	1.42	0.83	0.67	0...70	0.79	0.47	1.38	1.42	4	8992 lbf (40 kN)
B 17	M 16	4.92	55 x 150	1.61	1.42	0.83	0.67	0...40	0.79	0.47	1.38	1.42	4	8992 lbf (40 kN)
B 17	M 16	6.30	55 x 150	1.61	1.42	0.83	0.67	0...70	0.79	0.47	1.38	1.42	4	8992 lbf (40 kN)
B 21	M 16	6.30	62 x 187	1.18	1.65	1.06	0.79	0...40	1.18	0.55	1.73	1.73	4	13489 lbf (60 kN)
B 21	M 16	7.87	62 x 187	1.18	1.65	1.06	0.79	0...80	1.18	0.55	1.73	1.73	4	13489 lbf (60 kN)
B 21	M 20	6.30	62 x 187	1.18	1.65	1.06	0.79	0...40	1.18	0.55	1.73	1.73	5	13489 lbf (60 kN)
B 21	M 20	7.87	62 x 187	1.18	1.65	1.06	0.79	0...80	1.18	0.55	1.73	1.73	5	13489 lbf (60 kN)
B 25	M 20	7.87	70 x 235	1.18	2.01	1.34	0.94	0...70	1.22	0.67	2.36	1.85	5	16861 lbf (75 kN)
B 25	M 20	9.84	70 x 235	1.18	2.01	1.34	0.94	0...100	1.22	0.67	2.36	1.85	5	16861 lbf (75 kN)
B 25	M 24	7.87	70 x 235	1.18	2.01	1.34	0.94	0...70	1.22	0.67	2.36	1.85	5	16861 lbf (75 kN)
B 25	M 24	9.84	70 x 235	1.18	2.01	1.34	0.94	0...100	1.22	0.67	2.36	1.85	5	16861 lbf (75 kN)