Product description
Pneumatic toggle clamps GN 862.1 are built from the same construction as GN 862.
The special features of these clamps are that they can be mounted in two different planes, and they can also be operated manually via the grip handle. For example, they can individually be manually closed, and then all clamps can be opened at once via the pneumatic function.
To ensure an extended life of the mechanical parts as well as the air cylinders, the operating pressure should not exceed 6 bar and a compressed air maintenance unit should be installed upstream.
Toggle clamps have a permanent magnet integrated into the piston. In conjunction with sensors GN 3380, it is possible to detect the piston position, which can deliver a signal, for instance to a machine controller.
Specification
- Parts in sheet metal
Case hardening steel C10
Zinc plated, blue ppassivated finish
- Hardened bearing pins
- Case-hardened bearing rivets
- Case-hardened air cylinder bearing pins
- Double-action air cylinder
Max. operating pressure 6 bar
- All moving parts lubricated with special grease
- Solid molded plastic handle sleeve
Red, oil resistant
- Spindle assemblies GN 708.1, Type A
- Steel, zinc plated, blue passivated finish
- Rubber tip 85 Shore A
RoHS
