You are here: Product Overview
3.5 Controlling, Sealing, Connecting, and Securing Hydraulic and Fluid Systems
Threaded Plugs
GN 741 Fluid Fill / Drain Plugs

GN 741 Fluid Fill / Drain Plugs Aluminum, with or without Symbol, Resistant up to 212 °F

Fluid Fill / Drain Plugs GN 741: Aluminum, with or without Symbol, Resistant up to 212 °F

Type: AS - With drain symbol, plain finish
Identification no.: 1 - Without vent hole

Standard Sheet GN 741
Print This Page

Product description

The outer diameter d₁ of GN 741 fluid fill / drain plugs is matched to screw-in holes for pipe fittings according to DIN 3852.

The seal is embedded in a radial recess, and thus cannot be lost or squeezed out during tightening.

Specification

Body
Aluminum, fine turned
- Type OS, ES, and AS
  Plain finish
- Type OSS, ESS, and ASS
  Black anodized finish
- Laser engraved symbols
- Temperature resistant up to 212 °F (100 °C)

Seal
Acrylonitrile butadiene rubber (NBR)
Black

RoHS

On request

With dipstick

GN 741 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 212 °F sketch

Hide technical drawing

Part Options / Table

Type

OS	Without symbol, plain finish
OSS	Without symbol, black anodized finish
ES	With fill symbol, plain finish
ESS	With fill symbol, black anodized finish
AS	With drain symbol, plain finish
ASS	With drain symbol, black anodized finish

Identification no.

1	Without vent hole
2	With vent hole

Show / Hide columns

Werkstoff
d₃
Vent hole
d₄
Thread
e ≈
l₁
l₂
s
t

Show filter

Show Part Number

MetricInch

Part Number	d₁	d₂ Pipe thread	Fine thread	d₃ Vent hole	d₄ Thread	e ≈	l₁	l₂	s	t

741-19-M14X1.5-OS-1	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-M14X1.5-OS-2	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-M14X1.5-OSS-1	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-M14X1.5-OSS-2	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-M14X1.5-ES-1	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-M14X1.5-ES-2	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-M14X1.5-ESS-1	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-M14X1.5-ESS-2	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-M14X1.5-AS-1	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-M14X1.5-AS-2	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-M14X1.5-ASS-1	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-M14X1.5-ASS-2	0.75	-	M 14 x 1.5	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-OS-1	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-OS-2	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-OSS-1	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-OSS-2	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-ES-1	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-ES-2	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-ESS-1	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-ESS-2	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-AS-1	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-AS-2	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-ASS-1	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-19-G1/4-ASS-2	0.75	G 1/4	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
741-22-M16X1.5-OS-1	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-M16X1.5-OS-2	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-M16X1.5-OSS-1	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-M16X1.5-OSS-2	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-M16X1.5-ES-1	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-M16X1.5-ES-2	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-M16X1.5-ESS-1	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-M16X1.5-ESS-2	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-M16X1.5-AS-1	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-M16X1.5-AS-2	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-M16X1.5-ASS-1	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-M16X1.5-ASS-2	0.87	-	M 16 x 1.5	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-OS-1	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-OS-2	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-OSS-1	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-OSS-2	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-ES-1	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-ES-2	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-ESS-1	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-ESS-2	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-AS-1	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-AS-2	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-ASS-1	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-22-G3/8-ASS-2	0.87	G 3/8	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
741-26-M20X1.5-OS-1	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-M20X1.5-OS-2	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-M20X1.5-OSS-1	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-M20X1.5-OSS-2	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-M20X1.5-ES-1	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-M20X1.5-ES-2	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-M20X1.5-ESS-1	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-M20X1.5-ESS-2	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-M20X1.5-AS-1	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-M20X1.5-AS-2	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-M20X1.5-ASS-1	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-M20X1.5-ASS-2	1.02	-	M 20 x 1.5	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-OS-1	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-OS-2	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-OSS-1	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-OSS-2	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-ES-1	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-ES-2	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-ESS-1	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-ESS-2	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-AS-1	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-AS-2	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-ASS-1	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-26-G1/2-ASS-2	1.02	G 1/2	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
741-32-G3/4-OS-1	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-G3/4-OS-2	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-G3/4-OSS-1	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-G3/4-OSS-2	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-G3/4-ES-1	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-G3/4-ES-2	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-G3/4-ESS-1	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-G3/4-ESS-2	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-G3/4-AS-1	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-G3/4-AS-2	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-G3/4-ASS-1	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-G3/4-ASS-2	1.26	G 3/4	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-OS-1	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-OS-2	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-OSS-1	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-OSS-2	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-ES-1	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-ES-2	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-ESS-1	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-ESS-2	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-AS-1	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-AS-2	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-ASS-1	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M26X1.5-ASS-2	1.26	-	M 26 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-OS-1	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-OS-2	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-OSS-1	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-OSS-2	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-ES-1	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-ES-2	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-ESS-1	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-ESS-2	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-AS-1	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-AS-2	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-ASS-1	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-32-M27X1.5-ASS-2	1.26	-	M 27 x 1.5	0.08	M 5	1.23	0.67	0.35	1.06	0.31
741-40-M33X1.5-OS-1	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-M33X1.5-OS-2	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-M33X1.5-OSS-1	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-M33X1.5-OSS-2	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-M33X1.5-ES-1	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-M33X1.5-ES-2	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-M33X1.5-ESS-1	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-M33X1.5-ESS-2	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-M33X1.5-AS-1	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-M33X1.5-AS-2	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-M33X1.5-ASS-1	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-M33X1.5-ASS-2	1.57	-	M 33 x 1.5	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-OS-1	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-OS-2	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-OSS-1	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-OSS-2	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-ES-1	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-ES-2	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-ESS-1	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-ESS-2	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-AS-1	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-AS-2	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-ASS-1	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-40-G1-ASS-2	1.57	G 1	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
741-50-G11/4-OS-1	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-G11/4-OS-2	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-G11/4-OSS-1	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-G11/4-OSS-2	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-G11/4-ES-1	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-G11/4-ES-2	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-G11/4-ESS-1	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-G11/4-ESS-2	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-G11/4-AS-1	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-G11/4-AS-2	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-G11/4-ASS-1	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-G11/4-ASS-2	1.97	G 1 1/4	-	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-OS-1	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-OS-2	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-OSS-1	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-OSS-2	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-ES-1	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-ES-2	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-ESS-1	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-ESS-2	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-AS-1	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-AS-2	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-ASS-1	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M40X1.5-ASS-2	1.97	-	M 40 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-OS-1	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-OS-2	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-OSS-1	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-OSS-2	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-ES-1	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-ES-2	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-ESS-1	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-ESS-2	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-AS-1	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-AS-2	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-ASS-1	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X1.5-ASS-2	1.97	-	M 42 x 1.5	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-OS-1	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-OS-2	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-OSS-1	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-OSS-2	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-ES-1	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-ES-2	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-ESS-1	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-ESS-2	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-AS-1	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-AS-2	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-ASS-1	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-50-M42X2-ASS-2	1.97	-	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
741-60-G11/2-OS-1	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31
741-60-G11/2-OS-2	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31
741-60-G11/2-OSS-1	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31
741-60-G11/2-OSS-2	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31
741-60-G11/2-ES-1	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31
741-60-G11/2-ES-2	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31
741-60-G11/2-ESS-1	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31
741-60-G11/2-ESS-2	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31
741-60-G11/2-AS-1	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31
741-60-G11/2-AS-2	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31
741-60-G11/2-ASS-1	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31
741-60-G11/2-ASS-2	2.36	G 1 1/2	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31

Filter combination produces no result.

Show / Hide columns

Werkstoff
d₃
Vent hole
d₄
Thread
e ≈
l₁
l₂
s
t

Show filter

Show Part Number

Metric

MetricInch

d₁	d₂ Pipe thread	Fine thread			d₃ Vent hole	d₄ Thread	e ≈	l₁	l₂	s	t

0.75	G 1/4	M 14 x 1.5	-	-	0.08	M 5	0.68	0.61	0.31	0.59	0.31
0.87	G 3/8	M 16 x 1.5	-	-	0.08	M 5	0.82	0.61	0.31	0.71	0.31
1.02	G 1/2	M 20 x 1.5	-	-	0.08	M 5	0.96	0.63	0.33	0.83	0.31
1.26	G 3/4	M 26 x 1.5	M 27 x 1.5	-	0.08	M 5	1.23	0.67	0.35	1.06	0.31
1.57	G 1	M 33 x 1.5	-	-	0.08	M 5	1.46	0.77	0.43	1.26	0.31
1.97	G 1 1/4	M 40 x 1.5	M 42 x 1.5	M 42 x 2	0.08	M 5	1.86	0.83	0.47	1.61	0.31
2.36	G 1 1/2	-	-	-	0.08	M 5	2.27	0.87	0.51	1.97	0.31

Filter combination produces no result.

Build & Price

#3dConfiguratorCookieConsent

Diameter d₁

0.75

0.87

1.02

1.26

1.57

1.97

2.36

Pipe thread d₂

G 1/4

G 3/8

G 1/2

G 3/4

G 1

G 1 1/4

G 1 1/2

Fine thread d₂

M 14 x 1.5

M 16 x 1.5

M 20 x 1.5

M 26 x 1.5

M 27 x 1.5

M 33 x 1.5

M 40 x 1.5

M 42 x 1.5

M 42 x 2

Type

AS - With drain symbol, plain finish

ASS - With drain symbol, black anodized finish

ES - With fill symbol, plain finish

ESS - With fill symbol, black anodized finish

OS - Without symbol, plain finish

OSS - Without symbol, black anodized finish

Identification no.

1 - Without vent hole

2 - With vent hole

Diameter d₁

0.75

0.87

1.02

1.26

1.57

1.97

2.36

Pipe thread d₂

G 1/4

G 3/8

G 1/2

G 3/4

G 1

G 1 1/4

G 1 1/2

Fine thread d₂

M 14 x 1.5

M 16 x 1.5

M 20 x 1.5

M 26 x 1.5

M 27 x 1.5

M 33 x 1.5

M 40 x 1.5

M 42 x 1.5

M 42 x 2

Type

AS - With drain symbol, plain finish

ASS - With drain symbol, black anodized finish

ES - With fill symbol, plain finish

ESS - With fill symbol, black anodized finish

OS - Without symbol, plain finish

OSS - Without symbol, black anodized finish

Identification no.

1 - Without vent hole

2 - With vent hole

Selected Part

Part Number

Price

Call / Email for Price & Availability

Delivery time 5-7 days: 67 pcs.
Contact for delivery time >67 pcs.

Quantity

Create Project List

Save as Favorites

Recommend a product

Recipient e-mail address Your name (optional) Message (optional)

Please note our quantity discounts (Canadian Dollars).

No price breaks available.

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.015 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

CAD Download

CAD data

Other Data Formats

Login

In order to download a CAD file directly on our site you need to have an account. If you are not signed up, you can receive an email of the CAD file using the email CAD file below.

E-Mail Password I would like to remain logged in.

Request new password? Register as a new customer

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

E-Mail

2D or 3D CAD files are not available to download at this time.

Please enter your e-mail address below and the files will be sent to you.

E-Mail STEP-data 2D-DXF-data

CAD Download Tutorial

About CAD Downloads

Need Help?

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Eastern Time: 800-397-6993

Special Requests | Contact our sales team

GN 741-19-M14x1,5-OS-1GN 741-19-M14x1,5-OS-2GN 741-19-M14x1,5-OSS-1GN 741-19-M14x1,5-OSS-2GN 741-19-M14x1,5-ES-1GN 741-19-M14x1,5-ES-2GN 741-19-M14x1,5-ESS-1GN 741-19-M14x1,5-ESS-2GN 741-19-M14x1,5-AS-1GN 741-19-M14x1,5-AS-2GN 741-19-M14x1,5-ASS-1GN 741-19-M14x1,5-ASS-2GN 741-19-G1/4-OS-1GN 741-19-G1/4-OS-2GN 741-19-G1/4-OSS-1GN 741-19-G1/4-OSS-2GN 741-19-G1/4-ES-1GN 741-19-G1/4-ES-2GN 741-19-G1/4-ESS-1GN 741-19-G1/4-ESS-2GN 741-19-G1/4-AS-1GN 741-19-G1/4-AS-2GN 741-19-G1/4-ASS-1GN 741-19-G1/4-ASS-2GN 741-22-M16x1,5-OS-1GN 741-22-M16x1,5-OS-2GN 741-22-M16x1,5-OSS-1GN 741-22-M16x1,5-OSS-2GN 741-22-M16x1,5-ES-1GN 741-22-M16x1,5-ES-2GN 741-22-M16x1,5-ESS-1GN 741-22-M16x1,5-ESS-2GN 741-22-M16x1,5-AS-1GN 741-22-M16x1,5-AS-2GN 741-22-M16x1,5-ASS-1GN 741-22-M16x1,5-ASS-2GN 741-22-G3/8-OS-1GN 741-22-G3/8-OS-2GN 741-22-G3/8-OSS-1GN 741-22-G3/8-OSS-2GN 741-22-G3/8-ES-1GN 741-22-G3/8-ES-2GN 741-22-G3/8-ESS-1GN 741-22-G3/8-ESS-2GN 741-22-G3/8-AS-1GN 741-22-G3/8-AS-2GN 741-22-G3/8-ASS-1GN 741-22-G3/8-ASS-2GN 741-26-M20x1,5-OS-1GN 741-26-M20x1,5-OS-2GN 741-26-M20x1,5-OSS-1GN 741-26-M20x1,5-OSS-2GN 741-26-M20x1,5-ES-1GN 741-26-M20x1,5-ES-2GN 741-26-M20x1,5-ESS-1GN 741-26-M20x1,5-ESS-2GN 741-26-M20x1,5-AS-1GN 741-26-M20x1,5-AS-2GN 741-26-M20x1,5-ASS-1GN 741-26-M20x1,5-ASS-2GN 741-26-G1/2-OS-1GN 741-26-G1/2-OS-2GN 741-26-G1/2-OSS-1GN 741-26-G1/2-OSS-2GN 741-26-G1/2-ES-1GN 741-26-G1/2-ES-2GN 741-26-G1/2-ESS-1GN 741-26-G1/2-ESS-2GN 741-26-G1/2-AS-1GN 741-26-G1/2-AS-2GN 741-26-G1/2-ASS-1GN 741-26-G1/2-ASS-2GN 741-32-G3/4-OS-1GN 741-32-G3/4-OS-2GN 741-32-G3/4-OSS-1GN 741-32-G3/4-OSS-2GN 741-32-G3/4-ES-1GN 741-32-G3/4-ES-2GN 741-32-G3/4-ESS-1GN 741-32-G3/4-ESS-2GN 741-32-G3/4-AS-1GN 741-32-G3/4-AS-2GN 741-32-G3/4-ASS-1GN 741-32-G3/4-ASS-2GN 741-32-M26x1,5-OS-1GN 741-32-M26x1,5-OS-2GN 741-32-M26x1,5-OSS-1GN 741-32-M26x1,5-OSS-2GN 741-32-M26x1,5-ES-1GN 741-32-M26x1,5-ES-2GN 741-32-M26x1,5-ESS-1GN 741-32-M26x1,5-ESS-2GN 741-32-M26x1,5-AS-1GN 741-32-M26x1,5-AS-2GN 741-32-M26x1,5-ASS-1GN 741-32-M26x1,5-ASS-2GN 741-32-M27x1,5-OS-1GN 741-32-M27x1,5-OS-2GN 741-32-M27x1,5-OSS-1GN 741-32-M27x1,5-OSS-2GN 741-32-M27x1,5-ES-1GN 741-32-M27x1,5-ES-2GN 741-32-M27x1,5-ESS-1GN 741-32-M27x1,5-ESS-2GN 741-32-M27x1,5-AS-1GN 741-32-M27x1,5-AS-2GN 741-32-M27x1,5-ASS-1GN 741-32-M27x1,5-ASS-2GN 741-40-M33x1,5-OS-1GN 741-40-M33x1,5-OS-2GN 741-40-M33x1,5-OSS-1GN 741-40-M33x1,5-OSS-2GN 741-40-M33x1,5-ES-1GN 741-40-M33x1,5-ES-2GN 741-40-M33x1,5-ESS-1GN 741-40-M33x1,5-ESS-2GN 741-40-M33x1,5-AS-1GN 741-40-M33x1,5-AS-2GN 741-40-M33x1,5-ASS-1GN 741-40-M33x1,5-ASS-2GN 741-40-G1-OS-1GN 741-40-G1-OS-2GN 741-40-G1-OSS-1GN 741-40-G1-OSS-2GN 741-40-G1-ES-1GN 741-40-G1-ES-2GN 741-40-G1-ESS-1GN 741-40-G1-ESS-2GN 741-40-G1-AS-1GN 741-40-G1-AS-2GN 741-40-G1-ASS-1GN 741-40-G1-ASS-2GN 741-50-G11/4-OS-1GN 741-50-G11/4-OS-2GN 741-50-G11/4-OSS-1GN 741-50-G11/4-OSS-2GN 741-50-G11/4-ES-1GN 741-50-G11/4-ES-2GN 741-50-G11/4-ESS-1GN 741-50-G11/4-ESS-2GN 741-50-G11/4-AS-1GN 741-50-G11/4-AS-2GN 741-50-G11/4-ASS-1GN 741-50-G11/4-ASS-2GN 741-50-M40x1,5-OS-1GN 741-50-M40x1,5-OS-2GN 741-50-M40x1,5-OSS-1GN 741-50-M40x1,5-OSS-2GN 741-50-M40x1,5-ES-1GN 741-50-M40x1,5-ES-2GN 741-50-M40x1,5-ESS-1GN 741-50-M40x1,5-ESS-2GN 741-50-M40x1,5-AS-1GN 741-50-M40x1,5-AS-2GN 741-50-M40x1,5-ASS-1GN 741-50-M40x1,5-ASS-2GN 741-50-M42x1,5-OS-1GN 741-50-M42x1,5-OS-2GN 741-50-M42x1,5-OSS-1GN 741-50-M42x1,5-OSS-2GN 741-50-M42x1,5-ES-1GN 741-50-M42x1,5-ES-2GN 741-50-M42x1,5-ESS-1GN 741-50-M42x1,5-ESS-2GN 741-50-M42x1,5-AS-1GN 741-50-M42x1,5-AS-2GN 741-50-M42x1,5-ASS-1GN 741-50-M42x1,5-ASS-2GN 741-50-M42x2-OS-1GN 741-50-M42x2-OS-2GN 741-50-M42x2-OSS-1GN 741-50-M42x2-OSS-2GN 741-50-M42x2-ES-1GN 741-50-M42x2-ES-2GN 741-50-M42x2-ESS-1GN 741-50-M42x2-ESS-2GN 741-50-M42x2-AS-1GN 741-50-M42x2-AS-2GN 741-50-M42x2-ASS-1GN 741-50-M42x2-ASS-2GN 741-60-G11/2-OS-1GN 741-60-G11/2-OS-2GN 741-60-G11/2-OSS-1GN 741-60-G11/2-OSS-2GN 741-60-G11/2-ES-1GN 741-60-G11/2-ES-2GN 741-60-G11/2-ESS-1GN 741-60-G11/2-ESS-2GN 741-60-G11/2-AS-1GN 741-60-G11/2-AS-2GN 741-60-G11/2-ASS-1GN 741-60-G11/2-ASS-2

JW Winco Services

Request Callback

JW Winco Handbook

Your Contact

GN 741 Fluid Fill / Drain Plugs Aluminum, with or without Symbol, Resistant up to 212 °F

Product description

Specification

On request

Part Options / Table

Type

Identification no.

Metric

Build & Price

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

GN 442

GN 742

EN 747

EN 740

GN 441

GN 749

EN 745

GN 738

GN 7490

DIN 908

DIN 906

Your Contact

JW Winco Services