Clamping Knobs with Indexing Plunger GN 7336.8

List of Indexing Plunger Types Load Rating Information ISO Fundamental Tolerances Metric ISO Fine Threads DIN 13 Plastic Characteristics

Product description

Clamping knobs with indexing plunger GN 7336.8 are an advanced version of clamping knobs GN 7336.7.

Like GN 7336.7, they are used for positioning, securing and clamping adjusting elements simultaneously. The design of GN 7336.8 ensures that the plunger pin cannot be pulled from the indexing bore by turning the knurled knob and releasing it from the thread inside the body, but only by deliberately pulling up fully on the knurled knob (safety function).

Specification

Guide
Steel
Zinc plated, blue passivated finish

Plunger pin
Steel, blackened finish
Tip hardened

Knurled knob 7336
Plastic, Polyamide (PA)
Black, matte finish

Cover cap
Plastic, polyamide (PA)
Light gray, matte finish

Spring
Stainless steel AISI 302

RoHS

Accessory

Spacer Bushings GN 609.5

Your Contact

You are looking for a Winco partner near you?

Part Number	d₁	d₂	d₃ Pin -0.001 / -0.002 Bore G7	d₄	d₅	l₁	l₂	l₃	l₄ min.	l₅	A/F	Spring load ≈ Initial	End

7336.8-42-M16X1.5-6	1.65	M 16 x 1.5	0.236 -0.001 / -0.002 / G7	0.43	0.75	2.36	0.35	1.34	0.91	1.02	0.75	3.15 lbf (14 N)	5.85 lbf (26 N)
7336.8-42-M16X1.5-8	1.65	M 16 x 1.5	0.315 -0.001 / -0.002 / G7	0.43	0.75	2.36	0.35	1.34	0.91	1.02	0.75	3.15 lbf (14 N)	5.85 lbf (26 N)
7336.8-53-M16X1.5-6	2.09	M 16 x 1.5	0.236 -0.001 / -0.002 / G7	0.43	0.94	2.60	0.35	1.34	0.91	1.02	0.75	3.15 lbf (14 N)	5.85 lbf (26 N)
7336.8-53-M16X1.5-8	2.09	M 16 x 1.5	0.315 -0.001 / -0.002 / G7	0.43	0.94	2.60	0.35	1.34	0.91	1.02	0.75	3.15 lbf (14 N)	5.85 lbf (26 N)

d₁	d₂	d₃ Pin -0.001 / -0.002 Bore G7	d₄	d₅	l₁	l₂	l₃	l₄ min.	l₅	A/F	Spring load ≈ Initial	End

1.65	M 16 x 1.5	0.236	0.315	0.43	0.75	2.36	0.35	1.34	0.91	1.02	0.75	3.15 lbf (14 N)	5.85 lbf (26 N)
2.09	M 16 x 1.5	0.236	0.315	0.43	0.94	2.60	0.35	1.34	0.91	1.02	0.75	3.15 lbf (14 N)	5.85 lbf (26 N)