GN 7017 Indexing Plungers Steel, Lock-Out and Non Lock-Out, with L-Handle

Indexing Plungers GN 7017: Steel, Lock-Out and Non Lock-Out, with L-Handle

Type: B - Non lock-out, without lock nut
Material: ST - Steel

List of Indexing Plunger Types ISO Fundamental Tolerances Load Rating Information Stainless Steel Characteristics Metric ISO Threads DIN 13

Product description

Indexing plungers GN 7017 are activated through a L-handle and are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of the mating indexing bores.

Lock-out types C / CK are used for applications where the plunger pin needs to stay in its retracted position.

During assembly, the maximum tightening torques shown in the table should not be exceeded when securing the lock nut.

Specification

Guide / Plunger pin / Lever
SteelST, zinc plated, blue passivated finish

Spring
Stainless steel AISI 301

Hex nut ISO 4035
Steel, zinc plated, blue passivated finish

RoHS

GN 7017 Steel Indexing Plungers, Lock-Out and Non Lock-Out, with L-Handle sketch

Hide technical drawing

Part Options / Table

Type

B	Non lock-out, without lock nut
BK	Non lock-out, with lock nut
C	Lock-out, without lock nut
CK	Lock-out, with lock nut

Part Number B - Non lock-out, without lock nut	Part Number BK - Non lock-out, with lock nut	Part Number C - Lock-out, without lock nut	Part Number CK - Lock-out, with lock nut	d₁ Pin h11 Bore +0.001 / 0.003	d₂	d₃	l₁	l₂	l₃	l₄	l₅	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End


7017-4-M6-B-ST	7017-4-M6-BK-ST	7017-4-M6-C-ST	7017-4-M6-CK-ST	0.157 h11 / +0.001 / 0.003	M 6	0.10	1.26	0.37	0.79	0.10	0.63	0.24	1.6	0.67 lbf (3 N)	2.25 lbf (10 N)
7017-5-M8-B-ST	7017-5-M8-BK-ST	7017-5-M8-C-ST	7017-5-M8-CK-ST	0.197 h11 / +0.001 / 0.003	M 8	0.12	1.65	0.47	1.06	0.12	0.77	0.31	4.5	0.79 lbf (3.5 N)	3.03 lbf (13.5 N)
7017-6-M10-B-ST	7017-6-M10-BK-ST	7017-6-M10-C-ST	7017-6-M10-CK-ST	0.236 h11 / +0.001 / 0.003	M 10	0.14	2.01	0.55	1.32	0.15	0.94	0.39	10	0.90 lbf (4 N)	3.60 lbf (16 N)
7017-8-M12-B-ST	7017-8-M12-BK-ST	7017-8-M12-C-ST	7017-8-M12-CK-ST	0.315 h11 / +0.001 / 0.003	M 12	0.20	2.13	0.75	1.25	0.17	1.26	0.47	13	0.90 lbf (4 N)	4.95 lbf (22 N)
7017-10-M16-B-ST	7017-10-M16-BK-ST	7017-10-M16-C-ST	7017-10-M16-CK-ST	0.394 h11 / +0.001 / 0.003	M 16	0.20	3.05	0.98	1.99	0.20	1.32	0.63	42	0.90 lbf (4 N)	5.17 lbf (23 N)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ Pin h11 Bore +0.001 / 0.003	d₂	d₃	l₁	l₂	l₃	l₄	l₅	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.157	M 6	0.10	1.26	0.37	0.79	0.10	0.63	0.24	1.6	0.67 lbf (3 N)	2.25 lbf (10 N)
0.197	M 8	0.12	1.65	0.47	1.06	0.12	0.77	0.31	4.5	0.79 lbf (3.5 N)	3.03 lbf (13.5 N)
0.236	M 10	0.14	2.01	0.55	1.32	0.15	0.94	0.39	10	0.90 lbf (4 N)	3.60 lbf (16 N)
0.315	M 12	0.20	2.13	0.75	1.25	0.17	1.26	0.47	13	0.90 lbf (4 N)	4.95 lbf (22 N)
0.394	M 16	0.20	3.05	0.98	1.99	0.20	1.32	0.63	42	0.90 lbf (4 N)	5.17 lbf (23 N)

Build & Price

Selected Part

Part Number

Total (net)

Can$11.89

In Stock: 10

In Stock

Quantity

Create Project List

Save as Favorites

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	99	Can$11.89
100	249	Can$10.90
250	499	Can$9.91
≥ 500		Can$8.91

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.014 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993